What aspects should be paid attention to when aluminum extrusion
Release time:
2021-02-20 14:20
Before aluminum extrusion, determine whether the temperature of the mold temperature rod meets the requirements of the extrusion temperature, and whether there is a through-core heating furnace (the placement of the mold in the heating furnace is very important, and there should be a certain temperature difference between the mold and the mold).
The aluminum extrusion die must be aligned to the center, so as to avoid the phenomenon of overwhelming and plugging.
For different aluminum alloy profile molds, appropriate extrusion speeds should be selected to avoid poor extrusion due to excessive speed and rapidity. In the process of aluminum extrusion, we should also pay attention to the quality of aluminum bars to avoid mold collapse caused by aluminum bar impurities.
Aluminum extrusion die repair is an important process, but the first thing to consider is the strength of the mold. The mold must be repaired on the basis of ensuring the strength of the mold. Since welding has a great influence on the life of the mold, generally the final welding is not carried out. Especially the welding of the working belt can easily shorten the life. For the problem of slow profile trimming speed, it is generally adopted to trim the slow place without blocking the fast place. At this time, the burden is reduced on the mold structure to ensure the life of the mold to a certain extent. Improving the level of mold repair and reducing the number of mold trials is also one of the ways to improve the life of the mold.
In the process of die head processing, special attention should be paid to the punching links, especially some screw holes or brittle places, otherwise, it is easy to break the die head.
Care should be taken when operating aluminum extrusion dies to avoid bumps on the work belt. Before the mold enters the warehouse, it must be cleaned. Check the mold carefully for any small cracks and breakages.
For the finished mold, the process data must be effectively managed, such as mold repair plan, processing details, aluminum extrusion process, etc. Since these can be used as the replication target for subsequent supplementary molds or similar molds, it can effectively improve the pass rate of the upper mold.
In short, the improvement of aluminum extrusion die life depends on the perfect connection of design, manufacturing, use and subsequent maintenance processes. One link alone cannot achieve the goal. Through the effective integration of all links, Transit Aluminum believes that the life of the mold can be improved accordingly.
Previous Page
Previous Page
Related News